Like any electronic device, video game consoles are prone to failures and problems that can be easily fixed.Most importantly, if these inconveniences PlayStation 4 and PS4 remotes don’t recognize the controller.
Anyone with a PlayStation 4 knows that this type of control connects to the console via Bluetooth.To be able to use these plugins, teams must implement Sync with Double Shock.
While it’s possible, if you don’t use the controller for some time, the PS4 may not recognize the controller and the device may not be able to detect it. Although it is also possible that if you are successful, in the middle of a video game, the remote gets out of sync, forcing you to restart the game.
In general, there may be multiple issues that prevent PlayStation 4 doesn’t recognize controller. It’s for this reason that we’re going to give you some possible solutions to your DualShock not syncing with Play, whether using Bluetooth or connecting via a cable.
These video game systems are so complex that there are no issues with batteries, hardware, etc. Therefore, the remote or Dualshock should not have any kind of malfunction, whether it’s a new console or an old one. In extreme cases, you’ll have to reset your PlayStation 4.
Why is my PS4 not recognizing a USB-connected controller?
for several reasons Controller for PS4 Out of sync or not detected, whether you are using a cable or via bluetooth. Luckily, we’ll show you the possible reasons why your PS4 won’t recognize your controller soon.
stuck or stuck buttons
one of the main problem When using a PS4 gamepad, one or more buttons are stuck or not working.
There could be multiple reasons for this.Therefore, you must verify The problem is not the game. Another possible cause is that there may be a lot of dirt in the remote control button hole. To fix it, you can use compressed air to remove the dirt.
If none of this works for you and the gamepad isn’t syncing or the PlayStation 4 isn’t detecting the device, you’ll have to go to technical service. It’s safest that they’ll tell you why the controls aren’t launching on Play, and they’ll be able to detect possible hardware failures.
battery failure
The problem is old controls. Batteries may wear out and their lifespan will be greatly reduced if not maintained.
Fortunately, all was not lost. It’s probably just a cable issue you’re having. To verify it you have to change it so you will have a clear idea and you will rule out possible problems or finally solve the problem of not being able to start the remote with Play.
Device deprovisioning
maybe due to a new update Or the Play’s controls are misconfigured due to a system restart of the video console. This problem is quite common, and if the PS4 doesn’t recognize the controller, there are multiple solutions.
you can restart the console or command. If that doesn’t solve your problem, you can try to enter Play’s Safe Mode, where you must connect the controller via a USB cable. We recommend trying to replace the battery with a new one or clean the device hardware. The purpose of this is to minimize issues and provide better operability for the device when the PS4 doesn’t recognize the controller.
connection problem
If the remote doesn’t automatically connect to the console, you’ll findThe light flickered intermittently. It’s there when you have to restart it and wait a few minutes.
Disconnect the console and router. Doing so may cause them to restart, if that doesn’t work, try changing the input port From the console on the router.
What should I do if my controller is flickering and not detected on PS4?
Not only does the Play 4 work with controls that can connect wirelessly, butyou can also use voice control. This makes them a great choice for family fun. But in order to solve this specific problem, we will tell you what needs to be done next.
If your PS4 doesn’t recognize the controller or can’t detect the controller through the cable, find the reset button on the controller.we recommend to you use a pin or needle and hold for a few seconds. This will return the control hardware to its original state.
you can connect Gamepad to your console When the PS4 does not recognize the controller, re-bind via the USB cable. This is the most effective solution when the controller fails to start.
If you try to connect the controller with a cable and it doesn’t recognize it either, do the following:
- First, you need to press the share button and the PS button at the same time.
- This should allow the controller to be recognized by the game console.
- If this doesn’t work, try Replace the USB cablebecause for the one you use often, it cannot be detected.
Another possible solution to this problem is to go to Play Station 4 and press the power button until you hear two beeps.This is safe mode to enter the game and you will it will ask you to connect the controller Comes with USB cable. Next, you need to press the PS button. The controller should respond and you should now go to restart your PS4 and press the X button.
If after all this the game console still doesn’t detect the remote or won’t start, then you can implement another option.Disconnect ps4 power supplyThis brings it out of sleep mode.
Wait at least a minute before plugging in again. Now press the button on the console until it beeps twice and goes into safe mode. That’s when you go through all the steps above again.
How to troubleshoot DualShock and PS4 connection issues?
If Play detects that the controller is connected via a USB cable, it may be a sync problem and you must follow the steps below, which is why the PS4 is not recognizing the controller.Connect the cable to the two controller like ps4 console. When it is on, you must press the PS button on the remote.
The indicator that will show you that the control is on is led strip This is at the top. Another thing you should consider is that the battery has enough power. After you verify operation and load, pay the console and unplug it from the grid.
Now turn your controller, look for a hole in the back right, insert a paper clip and hold until it counts to 10. Replug everything and turn on playback. This action should be paired with your controller It should work fine.
Has a USB cable
One or more cables are always recommended USB compatible with Play 4, to avoid PS4 not recognizing the handle. As you can see, you may need it if your connectivity is not very good or the command is not detected by the same device. You’ll find this element available in any electronics store. You just need to make sure it’s original. Buying a generic USB cable results in more console failures and different connectivity.
Open the console
Usually, when playback is initiated, the remote binding system is also initiated.Remember that sometimes an update or socket issue can cause Deprovision the device You have to adjust it again.
Reset the controller from PS4
For this you need to use a cable connection USB controller to PS4, while your console is turned off and unplugged. When you’re all set, plug the console back in and turn it on, pressing the center button at the same time, and you’ll know the process was successful when the lights stop flashing.
Force restart on the controller
for perform a forced restart, You should take a small unfolded needle, needle or clip and insert it into the small hole near the L2 trigger for about 7 seconds. Therefore, it is one of the ways to solve the «PS4 does not recognize the controller» problem.