It is very important to have a good internet connection at home.Especially when we have all kinds of technological devices at home, such as Smart TV, tablet, smartphone or computer. Therefore, it is essential to have a good wireless internet connection to connect and enjoy the devices in our home.
What should I consider before using TP-Link to increase my wireless network range?
Internet signal can be poor. Either because the internet is slow, or because the signal is low and you can’t connect smoothly.Different devices meet Address these issues to expand coverage where the signal is weak.
Some of the most popular devices are repeaters. They have the ability to receive signal broadcasts from modems and then enhance and extend existing coverage. With your TP-LINK device, you can increase the range of your wireless internet connection.
Before using TP-LINK to increase the range in our network. Whether it’s for our office or our home, it knows the type of equipment we have, because there are all kinds of equipment on the market. Each model conforms to different powers that meet the needs. so, The signal in each room tends to lose.
internet router speed
It’s important to note that the speed of your internet router is very important, as some routers have a certain amount of MB per second. As a result, they will limit the power output of our internet.That is, if we contract our services Internet Broadband with 200 MB capacity per second. Although our router is only 100MB, we lose half the power due to capacity.
number of devices to connect
Another factor that affects signal or internet speed is the number of devices connected to the Wi-Fi network. This happens because the power of the internet will begin to be distributed among the multitude of devices.This means that the more devices are connected, the more likely it will start connecting decreased potency network.
What is the range of the TP-Link Extender repeater?
There are various TP-LINK expansion repeater models on the market. despite this, They are on average 900 m apart. Keeping this in mind, the signal will be variable if it is in an open field or if the signal must go up or down through floors. In this sense, the power will be varied and will be very specific to each model.
How do I link the TP-Link Extender with my internet provider’s router?
The TP-LINK extender model is designed to extend wireless networks.Therefore, they have a great advantage Work with any type of internet operator. So we won’t have compatibility issues. Because it’s just an extender or repeater for the signal in our home or office.
The TP-LINK expander model is currently the best selling model on the market due to its ease of operation and configuration. Additionally, we have several ways to configure via the WPS router button or «extended range».
Using the WPS button on the router
To configure our TP-LINK extender via the WPS button, we must find the WPS button on both the router device and the repeater. Now we’re going to keep pressing it and it will start looking for a signal to link to.
Once we find the button, we’ll go to where we want the repeater. Remember, we have to look for where the signal is almost at its limit. So we can extend the signal to a sector with no Wi-Fi signal. So we’ll go ahead and connect it to the power connector.
After waiting for the TP-LINK extender to turn on, we will wait a few seconds after it turns on and then continue to press the WPS button on the Wi-Fi router for a few seconds. After releasing it, we must now go to the button of the TP-LINK range extender device, which we will also press for a few seconds.
We will know if the wifi extender is connected and configured if The computer lights turned around. Then we know the installation is complete.
Use «Range Extender»
If our Wi-Fi router device didn’t have a WPS button, we had to install it manually. The first thing we have to do is connect our internet theme to a power outlet until we wait for the device to start blinking.
However, We can connect it via ethernet cable or wirelessly. If we decide to use a cable, we need to disconnect the computer from the wireless network in order to connect.
If we decide to connect it wirelessly, we have to connect to the computer via a cable. Select Wi-Fi connection&quo. Now we have to click on the update icon and connect the extender. This will allow us to see the name of the device, which will appear as the TP-LINK extender plus a number identifying it.
Now, on our computer, in any browser, we will go to the official TP-LINK page and visit the appropriate section to expand the scope. We press enter to open a page with the methods we can choose when installing.
When selecting one of them, we will enter a username and password, in this case, you have to put the word admin. When entering we can choose the quick configuration section. We select the router network and write the password. This way we can see if the repeater’s signal light is on.
Yes, we check if the light starts blinking, which means the connection is established. Now we can attach extenders in fixed places to repeat the signal and have better coverage.