Today’s wireless connections are really compelling, and when it comes to them being compelling, we mean more than anything about how they work.In the case of a home wireless Internet connection, they use to transmit Internet data and The cable is connected to the router Transmit wireless signals.
There is a way Two routers connected to the same network Internet, which is useful when you have unfriendly neighbors who want to use your Internet. Later, we’ll show you how to connect two routers to the same internet line, what it takes to connect two routers to the same network, and how to configure both routers.
What does it take to be able to connect two routers to each other?
To connect two routers you don’t need much, just an extra ethernet cable and an extension for the LAN cable if you want a fair internet connection.if you do not have Extension of LAN cable You can use the connector on the back of the router.
With these things in place, the next thing you should have is the ability to configure both routers as Wireless transmission. Later, we’ll show you how to configure both routers, but you’ll have to do your part to follow each instruction.
Beforehand you need to know that there are two routers will use more electricity in your house. However, it is worth it to connect two routers, because then you will be able to moderate the internet data consumption that the other will have. By managing two routers, you will be able to make a connection for you.
Older routers don’t have the current router’s menu. The router that came out today, Allows you to block users Connect to routers, limit their data consumption, decide who will connect to Wi-Fi, and more. Conversely, older routers didn’t bring any of these.
That’s why you have to use the trick of two routers. It’s important to note that there is a way to change your Wi-Fi name or password by knowing exactly what your router’s IP address is.
What is the correct way to connect a router with an ethernet cable?
Connecting the two routers is very simple, the only thing that is a bit complicated is the configuration section for each router.One of the two routers must be configured very precisely so that it can normal operation And in a stable way.
The last two subtopics will show you in detail everything you need to do with both routers in terms of setup.By the way, you need to know the router You can set the signal range Make it a smaller range or make it a maximum range.
The process of the first router
In the case of the first router, you don’t need to do much, you just enter its IP address Check to see if the connector of the Ethernet cable is working properly. See how to access your router configuration from your IP:
- Start any device that has registered the network internally
- Open a web browser
- Enter «192.168.0.1» in the field where you put the URL
- This is the IP address that almost all routers have.Then, if the router asks you, enter your username, and enter your password to access the configuration
- Go to the Administration section to see if the LAN port is enabled.Activate them if they are not enabled
This will be all that must be done about Configuration of router 1. For this router, you must connect an Ethernet cable containing an internet connection to the «LAN» port. The cable pulled for router 2 should be plugged into the port labeled «1».
After completing the configuration of router 1, you must continue to configure router 2, if you have time, it is recommended that you learn how to open the ports of the router.
The configuration process of the second router
As far as the configuration of the second router is concerned, it’s a bit more complicated. See what you need to do:
- Plug the ethernet cable plugged into port 1 of router 1 into the «LAN» port of router 2
- Then, access router 2’s configuration from the IP address
- Change factory settings like connection type and router security
- give it a password and a name
- update firmware
- Save changes and voila, that’s it
For example, if there is a problem with your router and this TP-LINK, you should go to the TP-LINK technical support site to find a solution.If your router is from another brand, you will have to Using the Technical Support Site That brand of router.