There is something wrong with the configuration of the Windows server, because sometimes the configuration programmed by the user changes suddenly, just by turning the device off and on, and this happens. Now to correct this, Microsoft releases Windows Server 2022 versionin this regard it provides new features such as detection of other computers and access to them; all are reciprocal.
For security reasons, this feature is disabled by default and allows us to access three options, the first is the one that is activated Allow viewing of servers and other devices. Disable option, which is present by default, hides server and custom options, and has the ability to restrict some of these views. In this article, we’ll show you how to fix this, but you’ll need to know the CMD commands for networking and be able to apply the process.
Why can’t I turn on network discovery in Windows?
When we use Microsoft Windows and need to share information with other computers, we may receive errors that network detection is off or cannot be done.This may be due to some factors; like some Service is not activated or unavailablewe’re not on the same type of network as the device we’re sharing, or we’re not connected at all.
This issue may also be due to network discovery and sharing not being enabled automatically and you have to do it manually. In any case, we have to make sure that the Windows Firewall is configured correctly, which may also be the reason why the connection cannot be performed.When all possible causes are investigated, we can come to a solution, here’s why Activation troubleshooter can help us Eliminate possible shortcomings.
Where did you turn on the network on your Windows computer?
To activate the network we have to go to the start, from there we look for the settings and a window appears Category called «Network and Internet», you click this section. From there you look for the ethernet option, where there will be a notification telling you if you are connected to the internet and an option called Change network settings.
Of the three options that appear, you have to enter an option called «Sharing Options» and a popup will appear.where you get the site to activate the network, let’s go to the box «Turn on network discovery» We mark it and click «Save Changes» for it to take effect. In this way, Windows network detection will be activated.
How do I change the network type of my Windows connection?
Now what we have to understand in detail is what kind of network our device is going to use, and if we need to change it, we can do it.so that it can sync and appear on the web later, and Other equipment can be used They are there and visible. This is important because this is where the connection is made, assuming your computer is not on the same network as the other computers, which makes it impossible to share anything as they are distinctly different.
in this case There are two types of networks, although there are more than two, these are the recommended and most commonly used: public networks, you have to be careful because you have no control over the network, i.e. linked devices; again, private networks are more recommended for security reasons. We can also automatically prioritize connecting to the network so that we don’t have to do it manually later.
public network
We go to start on the computer and from here we go to settings; then we go to the section called «Network and Internet» and you are in the «Ethernet» section. It is in this window that we must mark the blue network icon on the left, where we are in «Search devices and content». Then we change to public network in the options shown.
For private network
As before, we have to search for the same route, however, when you are already in the properties of the connected network, you have to change the box from public network to private network, so you will be able to connect yes. You can do this as many times as you want to change the network type.