From April of this year, you have no excuse to drop things because Apple has figured it out Solve our daily problemspublished Airtags this way, just put it on your key or agenda and you can see where it is in the Find app.
Even so, you are not immune to some setbacks in use or some complications in configuration, for them you are in the right article, here you will find Frequently Asked Questions Apart from finding solutions in the same way, this usually happens when using this extraordinary device.
Why can’t I set up my new AirTag on my iPhone?
Aviation labels will Allows targeting of objects you cannot findyou just need to configure it correctly, but if you have problems with the above configuration, you should check the following:
- You must demonstrate that the device can be dynamically configured.
- Another viable option is to remove the battery from the Airtag and put it back together.
- To configure multiple Airtags, you must ensure that the connection corresponds to only one device.
- If you continue to have this problem, you should reset your Airtag.
Have you activated Bluetooth, WiFi and mobile networks?
Any Airtag glitches or slowness may be due to Could not connect to your device correct. To do this, you can try turning on or off your mobile device’s bluetooth, wifi, or network by following these steps:
- Go to the Settings section of your iPhone or iPad.
- Next is to go to the bluetooth, wifi and mobile networks section.
- You need to turn off the switches for these three options and restart the device.
- After restarting the device, redirect to settings and turn on the switch that was turned off earlier.
Why is the Find app showing «Weak Signal» when trying to locate my Apple AirTag?
The AirTag feature allows you to easily locate apps and websites, using information from mobile networks, gps, bluetooth and wifi to determine your approximate location.
The reason the settings sometimes don’t match or don’t work is that maps, directions, and location-based applications rely heavily on data services.These data services are constantly changing or May not be available in some regions or incomplete.
Is Find My Apps enabled?
This is a complete application with the following features Find all your Apple devices, and everything associated with your Airtags, so you’ll have to make sure the switch is enabled in the configuration section, where you can turn it on or off as needed.you arrive surroundingsyou enter «your name»then in the options «search for my» your choiceSearch my Iphone» and activate this option.
How to reset network settings
As we already mentioned, Airtag requires bluetooth, wifi and mobile data to function properly, so this in turn can work up to a thousand, now if there is a problem with these functions then there is Difficult to find items And those connection failures will make the application not work as expected. We can try resetting the network settings.
drive back «surroundings» then select «Ordinary»as shown, select «recover«, now select «Reset network settings», You must enter your device’s passcode and press again «Reset network settings». This will be the solution to any problem with your Airtag regarding the network or not being able to successfully connect to the device.
How to remove and reinsert or replace the AirTag battery
The type of battery that powers our AirTag is Type CR2032, Apple says these batteries have a lifespan of about a year, and your iPhone will take the trouble to notify you when it needs to be replaced. If your Airtag is not working as expected, this may be a possible cause of the problem you are presenting, and the immediate remedy to optimize it is to remove and replace the battery in question.
It’s not complicated because battery may be faulty, we just press the back cover, turn it slightly and we can access the battery compartment, remove it and replace it. It’s so easy!
How do I update my iPhone software
A software update is a measure we must take into account in the event of a malfunction or malfunction of our equipment. Apple has been tasked with continuously implementing updates Make improvements and correct current bugs In some older software, this will help you resolve some issues with the AirTag connection. Next, we will tell you the steps to follow:
Over-the-air update
- Updating your device is simple, it will tell you when an update is available for your operating system. You just need to accept and install.
- Now you can also connect it to your local Wi-Fi network.
- Go to the «Settings» section, select «General» and press «Software Update».
- Click to download and install.
No matter where you buy AirTag, do they work in any country?
Apple’s Exact Search feature works with the U1 chip in iPhones and AirTags, which means it uses Ultra Wideband Not available in all countriesas this technology is subject to international regulatory requirements and is only available on the iPhone 11 and iPhone 12.
How secure is AirTags privacy?
Although it is a very useful tool in our daily life, its characteristics have always been Becoming Apple’s Security Issue Since it has been denounced for attack by unpopular people many times, the convenience offered by the tracker is so small and light that it can easily be placed on some object by a third person and monitored accordingly.
However, the well-known company has prepared some Measures to prevent bullyingincluding alerts that are activated on mobile devices when another foreign Airtag is detected, or that are periodically activated, although these measures do not meet the required precautionary expectations.
So Apple has been tasked with making more tweaks to the precautionary measures in recent weeks to make tracking more difficult, which will be available in the latest update, an alert when the AirTag is away from the owner, indicating that the alert will now be between 8 and 24 hours ; they are also working on a New support app for Android, So that you can also track other devices that are compatible with Apple’s network.
How to reset AirTag if it’s not working
if you present Common failures in Airtag Like a weak signal, connection issues or just our object’s position not clearly matching, a reset or reset might get you out of this predicament. Follow the steps below in detail:
- You have to remove your Airtag from Find My App, open the app and go to the Projects section.
- You must specify the Airtag to reset.
- Then you have to swipe and select the «Remove Element» option.
- It will ask you to confirm if you want to delete the item again.
- Then you «connect» it to your iPhone or iPad again, hold the AirTag close to your device and press the «connect» button that appears on the screen.