As long as you insert a SIM card into your Samsung Galaxy, you’ll find it’s a great phone for the price, but there are some common issues to consider.So today we show you Samsung Galaxy A50 screen flickers from time to time, to solve this annoying inconvenience for you. To avoid this problem.
What are the main reasons for the flickering of the phone screen?
There are many reasons why our phones flicker and we sometimes feel pained by it, but when your phone screen flickers, we might think it’s broken, but there might be another simple problem that needs to be fixed. When this happens, the flickering or closing is associated with falls on the floor and water, which can disrupt or damage the inside of the phone.
On the other hand, other reasons for your screen phone flickering, could be that it has a broken cable or is often damaged by falls, in which case you should carry Take your phone to a service center for inspection and repair to avoid damage. Also this is sometimes related to the phone’s auto brightness, to fix the above you have to enter the settings configuration «Screen – Brightness» And select Auto Brightness, which optimizes brightness based on the availability of outside light.
For these reasons, it is important to consider backing up files stored on Android as soon as possible and prevent them from being lost «Android Data Recovery»you will be able to get files from your phone without going into the system.
Improve sensitivity
Mainly when you install a screen protector to protect it from bumps or drops, you may often notice a reduction in screen protector screen sensitivity Because this phenomenon occurs when the protective layer is adhered.
In order to make up for the loss of screen sensitivity on your phone, it is very necessary to first check if there is a touch sensitivity option on your device, then activate it by following these steps:
- First, you access the application menu.
- Click the Settings icon.
- You then choose where to display the «screen»
- Finally, look for «Touch Sensitivity» and activate the switch located to the right of it.
System downgrade
Mainly we have to remember that the process is not easy and there is no program that can solve this problem for you. However, you will need to find the desired version of the Android image and see how it is installed on your phone, where, downgrade your phone It’s not easy to say because everyone has their own method and then it’s up to you to decide which is yours.
It should be noted that in some models it is very easy and simple as you just have to look for a few drivers in the factory image and use the command window to enter some commands, but in other smartphone models you will have to work with Programs like Odin, it’s the install version on Samsung and others; so when installing or downloading anything other than the Android version, you’ll need the factory image, as this is the file that contains all the necessary information OS and install all necessary software on your phone; as if it were a Windows disk used to format your computer.
What should I do once my Samsung A50 screen starts flickering?
stop for this winkyou must start your mobile and search The menu says options for «Settings», then the most common next thing to do is the last settings option, click in place of «About Device» and then click «Information» again. software».
On the other hand, you will see the last option «Build number», you will click a few times until you see a warning that definitely says that the developer option has been activated on your phone, now you have to go back to the menu once and Do the steps I said before, after that the «Monitor» option should appear, so when you find it, you should slowly search for «strict mode», click on it, if it’s activated, you’ll have to deactivate it for you to samsung stop flickering Once you’ve done this, verify that the flickering has stopped, and even if this continues, you’ll have to try again to track everything correctly.
Reboot the device
Sometimes, depending on the nature of flickering, it can be caused by a bug in the Android operating system. Sometimes the problem is temporary, so a reboot might help. So, for common Samsung Galaxy A50 issues and solutions, it doesn’t hurt to try a reset.
As we all know, Samsung’s mobile phone A No removable battery. Therefore, restarting the device can override this function.
Your best bet is to use a force restart, which you can access by simply pressing and holding the power button for at least 30 seconds.
if you wish restart your device You must hold down the volume down key and the lay down button, then select power off, to turn it back on you must hold down the side button until the screen turns on Screen.
Check the device charger
You must have heard that it is best to always use the original mobile charger. This is because the original charger will provide the proper charging power for the phone they make.
Using a charger that doesn’t fit your phone can cause serious problems for your Samsung Galaxy A50 or A50s.In fact, it can bring Overall deterioration of equipment. At other times, it produces strange behavior on the device.
One of the common consequences of using an inappropriate charger for your phone is flickering.Blinking may be a sign phone voltage problem. Of course, flickering usually occurs when connecting the device to a charging source, but this possibility is not ruled out.
Software update
This is unlikely to happen, but if you don’t find any solutions to the flickering, check to see if you’ve recently updated your phone. In remote situations, updates can cause various problems.Flickering is uncommon, but it can appear before error update.
Better to check if other users have the same problem when updating their phone. If so, you can try a restore update or factory reset your phone.
At other times, the update problem might just happen to you. In this case, if you have flickering, uninstall the update and try disabling automatic updates.
Turn off auto brightness
Auto-brightness can be helpful when moving around in changing light environments. However, incorrect calibration may affect this functionality.
In fact, automatic brightness will cause flickering When for some reason the function does not perform correctly. Given this, it’s best to disable this feature.
- To do this, go to «set up”, the phone settings space.
- Look for»Screen» and deactivate there»brightness automatic«. You can also try disabling»model External» if you don’t find another option.
Check developer mode options
Developer mode is for software developers and should not be enabled on mobile devices. Either way, it’s possible the option was enabled for some reason and some of its functionality was causing the problem. If so, try the following.
- Go to «set up«.
- At the bottom you will see «developer option”. This section shows options for software developers.
- Find here «model strict«and disable the option. It should be noted that you should also disable the option»watch renew. of surface«, «to show pressure«Yes»Place of pointerbecause all of these options create annoying flickering.
On the other hand, if you are planning to buy or own this phone, be sure to check if the Samsung Galaxy A40, A50, A79, A80 is water resistant so you can avoid surprises in the future.
Check for software updates
for Check for software updatesfirst you have to be connected to the internet, go to settings, then press search, look for updates from softwarehowever, in some phone models you may need to look for system updates, you have to take into account that the phone will not receive updates at the same time to avoid overloading the servers, the process may take longer if you have a contract with a carrier , as this involves multiple stages of operator approval.
Turn off auto brightness
if you wish Disable the phone’s automatic brightnessyou just need to stay on your phone’s home screen and press the close button and it will show you your phone profile and options to deactivate or save power, just like you can go to menus, settings, phone, screen and inside you You will be able to see different customization options for the screen, including assigning the brightness level of the screen.
Enable safe mode
It’s easy and simple because all you have to do is; with equipment To power on, you need to press and hold the power button, and then long press the power button in the pop-up menu until the restart message appears. safe mode Then press OK to reboot into Safe Mode.
Is it possible to prevent it from starting to flicker on Samsung devices?
If you find yourself in this situation, the main thing is to avoid it before you start flicker; the first thing you should do is restart your Telephone In safe mode you have to uninstall the suspicious app because suppose the problem is related to screen flickering Fix in safe mode, which means that some app is related to the problem; you have to search for the app, reset it, if that doesn’t work you have to uninstall and finally you have to restart the phone in recovery mode.